BRITISH STANDARD BS EN 746-2:2010 Industrial thermoprocessing equipment Part 2: Safety requirements for combustion and fuel handling systems ICS 25.180.01 BSi British Standards Not fr Resale d without license from IHS BS EN 746-2:2010 National foreword This British Standard is the UK implementation of EN 746-2:2010. It supersedes BS EN 746-2:1997 which will be withdrawn on 31 May 2011. The UK participation in its preparation was entrusted to Technical Committee MCE/3/8, Thermoprocessing equipment - Safety. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard Amendments/corrigenda issued since publication was published under the authority of the Standards Policy and Strategy Date Comments Committee on 30 June 2010 BSI 2010 ISBN 978 0 580 54597 9 ed without license from IHS Not for Resale EN 746-2 EUROPEAN STANDARD NORME EUROPEENNE EUROPAISCHE NORM May 2010 ICS 25.180.01 Supersedes EN 746-2:1997 English Version Industrial thermoprocessing equipment - Safety requirements for combustion and fuel handling systems Equipements thermiques industriels - Partie 2: Industrielle Thermoprozessanlagen - Teil 2: Sicherheitsanforderungen an Feuerungen und Prescriptions de sécurité concernant la combustion et la manutention des combustibles Brennstofffuhrungssysteme This European Standard was approved by CEN on 11 March 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. cen EUROPEAN COMMITTEE FOR STANDARDIZATION COMITEEUROPEEN DE NORMALISATION EUROPAISCHES KOMITEE FUR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels @ 2010 CEN All rights of exploitation in any form and by any means reserved Ref.No.EN 746-2:2010:E worldwide for CEN national Members. Copyright European Committee for Standardization Not for Resale ensefromIHS