BS IS0 17396:2024 BSl Standards Publication Synchronous belt drives Metric pitch - Tooth profiles T and AT endless and open ended belts and pulleys bsi. BSIS017396:2024 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 17396:2024.It supersedes BSIS0 17396:2017, which is withdrawn. TheUKparticipation inits preparation was entrustedto Technical CommitteeW/-,ConsumerProducts and ServicesSectorPolicyand Strategy Committee. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual andlegal considerations Thispublication hasbeen prepared in good faith, however no representation,warranty,assurance or undertaking (expressor implied) is or will bemade, and no responsibility or liability is or will be reasonableness of thispublication.All and any suchresponsibility and liability is expresslydisclaimed to the full extent permitted bythelaw. This publication is provided as is,and isto beused at the recipient's own risk. The recipient is advised to consider seeking professionalguidance with respectto its use ofthis publication. This publication is not intended to constitute a contract. Users are responsibleforitscorrectapplication. TheBritishStandardsInstitution2024 Published by BSI Standards Limited 2024 ISBN9780539315523 ICS21.220.10 Compliance with a British Standard cannot confer immunityfrom legal obligations. This British Standard was published under the authority of the StandardsPolicyand Strategy Committeeon30September2024. Amendments/corrigenda issuedsincepublication Date Textaffected BSISO17396:2024 International ISO Standard IS017396 Third edition Synchronous belt drives Metric 2024-09 pitch - Tooth profiles T and AT endless and open ended belts and pulleys Transmissions synchronesparcourroies-Pasmeétrique Poulies et courroies dentees sans fin oua bout libre a dents de profil Tou AT Reference number IS017396:2024(en) @ISO2024