BSIS023704-1:2022 BSl Standards Publication General requirements for cyber-physically controlled smart machine tool systems (CPSMT) Part 1: Overview and fundamental principles bsi. BSIS0 23704-1:2022 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 23704-1:2022 The UK participation in its preparation was entrusted to Technical Committee AMT/4, Industrial data and manufacturing interfaces. A list of organizations represented on this committee can be obtained on request to its committee manager. Contractual and legal considerations This publication has been prepared in good faith, however no representation, warranty, assurance or undertaking (express or implied) is or will be made, and no responsibility or liability is or will be accepted by BsI in relation to the adequacy, accuracy, completeness or liability is expressly disclaimed to the full extent permitted by the law. This publication is provided as is, and is to be used at the recipient's own risk. The recipient is advised to consider seeking professional guidance with respect to its use of this publication. This publication is not intended to constitute a contract. Users are responsible for its correct application The British Standards Institution 2022 Published by BSI Standards Limited 2022 ISBN 978 0 539 04973 2 ICS 25.040.20 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2022. Amendments/corrigenda issued since publication Date Text affected BS ISO 23704-1:2022 INTERNATIONAL ISO STANDARD 23704-1 First edition 2022-06-28 General requirements for cyber: physically controlled smart machine tool systems (CPSMT) - Part 1: Overview and fundamental principles Exigences generales relatives aux systemes de machines-outils intelligents a commandes cyber-physiques (CPSMT) - Partie 1: Vue d'ensemble et principaux fondamentaux Reference number IS0 23704-1:2022(E) ISO @ IS0 2022