EUROPEAN STANDARD EN 60684-3-217 NORME EUROPEENNE August 1998 EUROPAISCHE NORM ICS 29.035.01 Descriptors: Solid electrical insulating materials, protection sleevings, heat-shrinkable materials, polyolefins, flexible conductors, designation, individual specifications, dimensions, characteristics, tables of data, breakdown voltage English version Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 217: Heat-shrinkable polyolefin sleeving, flame retarded shrink ratio 3 : 1 (IEC 60684-3-217:1998) Gaines isolantes souples Isolierschlauche Teil 3: Partie 3: Spécifications pour types Anforderungen fur einzelne particuliers de gaines Schlauchtypen Feuille 217: Gaines thermorétractables Blatt 217: Warmeschrumpfende Polyolefinschlauche, flammwidrig, en polyoléfine, retardées a la flamme, rapport de rétreint 3 : 1 Schrumpfverhaltnis 3 : 1 (IEC 60684-3-217:1998) (CEI60684-3-217:1998) This European Standard was approved by CENELEC on 1998-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELECmember. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europaisches Komitee fur Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels CENELEC members. Ref.No.EN60684-3-217:1998E EN 60684-3-217:1998 Foreword Contents Page The text of document 15C/881/FDIS, future edition 1 of IEC 60684-3-217, prepared by SC 15C, Foreword 2 Specifications, of IEC TC 15, Insulating materials, Introduction 3 was submitted to the IEC-CENELEC parallel vote Scope 3 1 and was approved by CENELEC as EN 60684-3-217 on 1998-08-01. 2 Normative references 3 The following dates were fixed: 3 Designation 4 4 latest date by which the EN Conditions of test 4 has to be implemented at 5 Requirements 4 national level by 6 Sleeving conformance 4 publication of an identical Annex ZA (normative) Normative national standard or by references to international endorsement (dop) 1999-05-01 publications with their corresponding latest date by which the European publications Inside back cover national standards Table 1 - Dimensional and mass conflicting with the EN 4 requirements have to be withdrawn (dow) 2001-05-01 Table 2 Property requirements 5 Annexes designated “normative" are part of the Table 3 Requirements for breakdown body of the standard. 7 voltage In this standard, Annex ZA is normative. Table 4— Resistance to selected fluids 7 Annex ZA has been added by CENELEC. Table 5 — Additional property 8 requirements Endorsement notice The text of the International Standard IEC 60684-3-217:1998 was approved by CENELEC as a European Standard without any modification. 2 EN 60684-3-217:1998 Introduction This International Standard is one of a series which deals with flexible insulating sleeving for electrical purposes The series consists of three parts: Part 1: Definitions and general requirements (IEC 60684-1); -Part 2: Methods of test (IEC 60684-2); Part 3: Specifications for individual types of sleeving (IEC 60684-3) This standard gives one of the sheets comprising Part 3 as follows: Sheet 217: Heat-shrinkable polyol